Simple modular System - only 2 lengths of LED strip, 3m & 10m - enable any project to be built using the minimum of components - another benefit is that only a small section of the LED strip needs to be replaced if damaged, not the whole shaft length. LED strips are powered directly by 240V, no driver needed. The LED strips connect together to create shaft lighting systems suitable for any length of shaft up to 50 metres.
Quick to install
Emergency backup available
Compliant with the requirements of EN81-20 and EN81-50
The high-quality drapes are easy to install and can protect the interior effectively. They come with a clear PVC window for the control panel as well as a ‘Caution Mirror/Glass Behind’ sign.
KAPOK’88 drapes are shipped in an original storage bag. A number of permanent and temporary mounting options allow maximum flexibility. The drapes are available in beige, blue, grey or brown.
The Lift HAWK is a sensor fitted on the top of the lift car (TOC) which can remotely check the lift status through connection with a Digital Communication Platform (DCP) or Memcom+. Information such as the time of the last lift movement, current door status and time of the last door move can all be remotely tested using this device. The HAWK also self-learns the typical activity of a lift and can autonomously perform lift tests in periods of prolonged inactivity.
Remotely test the lift status without having to connect to the lift controller
Self-learning sensor performs autonomous tests when usage patterns are not typical
Real-time monitoring through the Avire Hub
Saves time and cost of visiting site for false call outs
Shaft lighting system with different protection classes for new systems or retrofits. Tailored solutions that are quick and cost-effective to install:
· Mark out the first light/wall mounting plate
· Dowel into place
· Insert cable
· Move on to next light
· …all done
This special power supply is the most powerful in its class, the result of 2 years of research and development combines the switching technology to our exclusive Aral, thus ensuring the required functionality at a very high quality and reliability of the finished product.
The Dewhurst CJ70 Serial Electronic Gong is an audible indication for lift arrival at a floor, which also has output to control lantern arrows. This low profile serial unit offers the choice of a single or double tone and is designed to be connected to the Dewhurst 4 wire serial encoders (CH024/034 or CX-Basic). The CJ70 is suitable for use with the Dewhurst Profile station, which could also include the 30mm and 50mm ULSP digital display unit.
Serial gong (used without displays)
Outputs to control lantern arrows
Single or double tone
Can be used to meet M2/S2 Building Regulations
Works with CH024/CH034 Serial Encoder or CX-Basic Encoder Board
The vertical supports can be fitted on the are roof wherever space is available. Excentrical positioning is possible due to the fact that the horizontal bars are lead through the supports. Hands and knee rail can be cut down to the required size on site.
The EN-BUZZ has been designed to work with any button and controller where the button and illumination is wired using a 3 wire method. The common supply (24V d.c. ± 20%) to the button and illumination can be either polarity. One EN-BUZZ will be required for each set of car buttons and each landing station.
There are two types of EN-BUZZ available, Standard (used with grille) and loud (used without grille). A 110V d.c. Standard version is also available, please refer to publication number PB169.
Creates a bleep tone each time a call button is pressed and acknowledged